Olympia Protect 6XXX Series, Инструкция по эксплуатации

Страница: 25 / 36

Remote Access Via Telephone
Giu
OPERATING
INSTRUCTIONS
25 Page
Remote Access Via Telephone
The wireless alarm system can be operated by remote access using a
telephone. You can use a telephone to activate or deactivate the alarm
system and switch the handsfree and screening functions on.
NOTE: The base unit takes your call after 8 rings. An­
swering machines operate according to the
same principles of taking a call after a specific
number of rings. For this reason, you must not
connect an answering machine to the same
telephone connection to which the alarm sys­
tem is connected.
Proceed as follows to operate your alarm system by remote access using
a telephone:
1. Dial the phone number of the telephone connection to which your
alarm system is connected.
2. Wait until the alarm system takes the call following the eighth ring.
You will hear a long acoustic signal.
NOTE: As soon as a connection is established with
the alarm system, "Remote…"
appears in the
base unit's display.
3. Enter your 4-digit Entry Code.
4. When you enter the Entry Code correctly, you hear 2 short acoustic
signals. If you enter the Entry Code incorrectly 3 times, the connec­
tion is interrupted.
5. Use the keypad on your telephone to execute the following functions
(refer to table). The monitoring functions are confirmed by a voice
message.
Key Function
[1] Activate the handsfree function
[2]
Activate the screening function (in the
room)
[3] Activate Alarm mode
[4] Activate At Home mode
[5] Activate Silent mode
[6] Activate Disarmed mode
[#] End the handsfree or screening function
[#], [#] End remote access via telephone facility
6. Remote access to your alarm system is interrupted when you press
the [#] button twice on your telephone.