Olympia Protect 6XXX Series, Инструкция по эксплуатации

Страница: 19 / 36

Configuration
Giu
OPERATING
INSTRUCTIONS
19 Page
Trigger Delay
The alarm is triggered after a delay so that if someone enters through the
main door, they can disarm the alarm system before the acoustic alarm
and internal telephone dialling unit are activated. You can set a trigger
delay between 0 and 240 seconds.
If one of the sensors is tripped, the system must be switched to be dis­
armed for this period so that no alarm is triggered.
You can select whether an acoustic signal should be issued from the base
unit during this period or not.
1. Enter the device-specific Entry Code. Confirm it by pressing .
2. The menu is opened by pressing the Menu button briefly.
3. Select the Trigger Delay menu option. Confirm it by pressing
.
4. Select the Duration menu option. Confirm it by pressing .
5. Use the and buttons to set the required delay time.
6. Confirm it by pressing the button. The system returns to the
previous menu level.
7. Select the Trigger Tone menu option. Confirm it by pressing
.
8. Use the and buttons to select Off or On .
9. Confirm it by pressing the button. The system returns to the
previous menu level.
10. Press to exit from the menu.
Arming Delay
You can set an activation delay between 0 and 240 seconds. The alarm
system is armed after this period has expired. You must leave your apart­
ment/house within this period through the door which will subsequently be
monitored. An acoustic signal is issued by the base unit every second for
the period of the set delay time.
1. Enter the device-specific Entry Code. Confirm it by pressing .
2. The menu is opened by pressing the Menu button briefly.
3. Select the Arming Delay menu option. Confirm it by pressing
.
4. Use the and buttons to set the required delay time.
5. Confirm it by pressing . The main menu reappears in the
display.
6. Press to exit from the menu.