Olympia People, Руководство пользователя

Страница: 72 / 137

Using the
Winchester Drive
Under
MS-DOS
Formatting the Winchester Drive
(Drive A)
The Winchester drive (Drive A)
must also be formatted for use
under the MS-DOS operating
system on your PEOPLE
Personal Microcomputer in
much the same way as the
formatting procedure under
CP/M.
To format the Winchester:
• Switch to drive B (page 5/27)
• Type: WIFORM A:
• Depress the [RETURN] key
NOTE:
If the Winchester to be
formatted had been previously
used, this procedure will erase
all files located on the
Winchester.
The following prompt:
Do you really want to format
Winchesterdrive (Y/N)
will appear on your screen.
• Type: Y and [RETURN]
After you have depressed Y with
a [RETURN], the computer will
proceed to format the
Winchester. This procedure
takes approximately three
minutes.
Loading Files onto the
Winchester Drive Under MS-
DOS
When working with the PEOPLE
Personal Microcomputer with a
system disk drive and a
Winchester drive, it will
sometimes be necessary to
copy data from one drive to the
other. This could be for either
external use or for (BACK-UP)
safekeeping.
To copy all files from the floppy
diskette onto the Winchester
drive:
• Type: COPY B :V A:
.[RETURN]
Your screen will display each
file name as it copies onto the
Winchester drive.
It is possible to copy only one
file at a time from the floppy
diskette onto the Winchester
drive. For example, to copy one
file:
• Type: COPY B:filename.xxx A:
• [RETURN]
Copying files from Winchester
to Floppy Diskette
It will occasionally be necessary
to copy files from the
Winchester drive onto a floppy
diskette for back-up purposes.
First, you must format a blank
diskette.
NOTE:
At this point all your files
should have been copied over
to the Winchester drive with the
FORMAT file on drive A.
To format a blank diskette:
• Switch over to drive A (page
5/27)
• Type: FORMAT B: [RETURN]
The next message:
Insert new diskette for drive B:
and strike any key when ready
appears on your screen.
5/ 29