Olympia People, Руководство пользователя

Страница: 37 / 137

Any date is acceptable in
answer to the new date prompt
as long as it follows the above
format. Separators between the
numbers can be hyphens (-) or
slashes (/). ie. 1-1-84 or
01/01/84
• Enter current date
If you enter an invalid date, the
system will prompt you again.
Enter the date again.
• Now press [RETURN] to
activate the entry
The screen will prompt you:
Current time is 8.30:14:32
Enter new tim e :____
The hour is represented as a
one or two-digit number
from 0-23.
The minutes are represented
as one or two-digit number
from 0-59.
MS-DOS uses military time; ie.
1:30 p.m. is written 13:30. Only
use the colon (:) to separate
hours and minutes.
NOTE:
To correct a typing error press
the Backspace key, Delete key
or Control H. Control C cancels
your current command entry.
• Press [RETURN] to activate
the entry
You have now completed the
steps for starting MS-DOS.
On your screen an A> will
appear. This indicates that you
are currently working on disk
drive A. If you had chosen drive
B, the display would read B>.
NOTE:
If your system diskette has tape
over the write-protection notch
you may get the message
WRITE PROTECTED. If you do,
continue pressing [RETURN]
until you see an A> or a
B> followed by the cursor.
This is a built-in protection
mechanism.
• Enter current time