OLYMPIA OL2410 Owner's Manual
63
9.8 Remote Control through C/O line
You can access many features of this DAM remotely from a touch-tone phone.
1) When the DAM is connected to the telephone line. During the announcement,
enter your remote access code (default 0000).
2) If the code entered is correct, it will give one beep.
3)
If remote code entered is wrong, the DAM cannot enter remote control mode.
The DAM allows user to enter 16 digits maximum. If it still cannot match the
4 digits, it disconnects. If the user presses wrongly, the user needs to enter the
whole remote code again.
4)
Within 5 seconds, enter a remote command (see “remote access commands”)
else it will play the help menu automatically. After finished the help menu
playback, if there is no command input within 20 seconds, it will be
disconnect.
5)
The DAM has voice prompts to help you with remote operation. When you
enter Remote Control State, then press ‘*’ to hear the voice menu while
remotely connected to the DAM.
9.8.1 Remote Control Commands
Function
Command
Play messages
First press 1, 2 or 3, to select and play
message in mailbox 1, 2 or 3. Then it
will say, “You have xx new messages,
xx old message or no message”.
Repeat current/ previous message
During message playback, press 4 to
play current message after 1 second
of
current
message
playback.
Otherwise, play Previous message.
Stop message
During
message
playback
or
recording, press ‘5’ to stop.
Play Next message
During message playback, Press ‘ 6 ’
to play Next message.
Delete current message
During message playback, press 7 to
delete the current message.
Record Memo
Press 8 to record memo. After 8 is
pressed, it will say, “Please select a
mailbox”. Press 1,2 or 3 and then
start recording. Press ‘5’ to stop
recording.
Record announcement
Press 9, then presses 5 to stop.
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com
