OLYMPIA OL2410 Owner's Manual
49
10)
Press Stop key or no key was pressed within 20 seconds to exit menu mode
11)
The default is Sunday, 12:00AM
9.1. 3 Announcement
1) In standby mode, press
Menu
key three times, the unit goes to Announcement
setting mode, “A1” or “A2” will be displayed on the 7-segment LED, and it will
announce “announcement one” or “announcement two”.
2)
If presses “REC/memo” to enter announcement recording, all of the other
buttons are disabled except Stop key.
3)
During Announcement menu mode, press Stop key or no key was pressed
within 20 seconds to exit menu mode
4)
There are default announcements.
9.1.4 Change remote access code
1) During announcement menu, press “
Menu
” button will enter remote access
code setting mode with a beep. “Ac” will be displayed on the 7-segment LED, and
it will announce “remote access code is xxxx” and the current remote code will
display on 7-segment for 1 second. (e.g., remote code is 1234, the display
sequence is “12” then “- -“ then “34”.)
2)
Press
“Previous”
or
“Next”
button to modify the first digit of the code and,
the first two digits are displayed on the 7- segment LED with voice prompt
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com
