Olympia NC 580
- 21 -
Error codes (technical problem):
Error message
Cause of error
Troubleshooting
E00
UV sensor
Ensure that the machine cover is closed
properly and no light can enter.
E10
Hopper sensor
Remove the banknotes and clean the
hopper sensor
E11
Stacker sensor
Remove the banknotes and clean the
stacker sensor
E30
Left counting sensor
E31
Right counting sensor
E60-E6B
E70-E7B
IR sensor
Remove the banknote and clean the
detection area inside the currency counter.
E50
Rotation sensor for counting speed
Clean the wheels near the counting sensors.
If the error persists clean the transport
wheels.
E80
Internal memory
Reset the machine to the factory settings.
3.2. Care and maintenance
Exchange of the fuse
1.
Disconnect the main power cable before opening the cover,
otherwise
you might risk an electric shock.
2.
To exchange the fuse, please remove the cover first. Replace
the cover properly after exchanging the fuse.
Exchange of wear and tear parts
3.
Exchange of other wear and tear parts only by Olympia and
authorized dealers.
Cleaning the NC 580
The NC 580 has to be regularly cleaned of dust and other contamination, which are partly getting into the unit
during operation; they contaminate the sensors and prevent optimal counting and checking of banknotes. Use a
soft brush or cloth for cleaning the sensors and remove the dust. Use a compressed air spray for banknote
counters to remove dust from difficult accessible places. This ensures years of correct functioning of the NC
580.
