Olympia NC 455, Руководство по эксплуатации

Страница: 14 / 68

14
Giu
Display
The illustration depicts the display [2] during the self-
diagnosis.
24
25
29
30
31
26
27
28
32
33
34
35
36
24 Top display for the result of the previous count
function or preset quantity for bank note batches
25 AUTO = Automatic start is activated
26 COUNT = Counting without sensors is activated
27 BAT = Batch function is activated
28 ADD = Add function is activated
29 Indicator for acoustic signal
30 Bottom display for the number of bank notes
31 Indicator: bank note counter in operation
32
MT = Advanced magnetic strip test is activated
33 DD = Bank note width test is activated
34 IR = Infrared test is activated
35 MG = Magnetic strip test is activated
36 UV = Ultraviolet test is activated
Operation
Connecting the Bank Note Counter
If the bank note counter will not be used for a
longer period, disconnect it from the power out­
let.
Æ
Connect the power cable to the power plug
socket [11] of the bank note counter.
Æ
Connect the power cable to a properly installed
power socket.
Connecting an External Display
The bank note counter can be connected to the exter­
nal display [37] supplied.
The bank note count is shown on the external dis­
play [37].
Æ
Connect the external display [37] to the connection
port [10] on the bank note counter.
37
37 External display
Switching the Bank Note Counter On/Off
The bank note counter is switched on and off using a
switch [8] on the rear of the machine.
After switching the bank note counter on, it completes
a self-diagnosis. During the self-diagnosis,
8888
and
88888
appear in the displays [24, 30]. When the self-
diagnosis has finished without any errors,
X0
appears
in the displays [24, 30].
24 30
If an error is detected, it is indicated in the top dis­
play [24] (refer to Clearing Errors).