9
Giu
NC 325, 335
Æ
Press and hold the
CLEAR/ ON/OFF
button
for 3 seconds.
After switching the device on, it performs a
self-diagnosis. When the self-diagnosis has
finished without any errors,
X0
appears in the
display. If an error is detected, it is indicated
accordingly in the display.
Then contact the
service.
NC 315
Æ
Press and hold the
CLEAR/ ON/OFF
button
for 3 seconds.
If the device will not be used for a longer
period, disconnect it from the power sock-
et.
Preparing Bank Notes
Pay attention to the following points to prevent
malfunctions.
Æ
Check the bank notes for paper clippings, pa-
per clips, rubber bands and other foreign bod-
ies, and remove them before inserting the bank
notes in the device.
Æ
Do not insert any damaged bank notes.
Æ
Smooth any creased and folded bank notes
before inserting them.
Inserting Bank Notes
Æ
Lay the bank notes in the infeed tray individu-
ally, with the short side at the front. The bank
note is drawn in and controlled automatically.
In the case of a bank note which is wrong-
ly inserted or is not recognised, an error is
indicated in the display and an acoustic signal
is issued.
Æ
Wait unit the bank note controlled has been
fully ejected into the output tray and remove it
before inserting the next bank note to be con-
trolled.
Bank notes which are incorrectly inserted
can lead to a malfunction. Strong magnet-
ic fields can affect the sensor and falsify re-
sults.
Operating Elements
NC 335
1
2
3
4
5
6
7
1 Display of total quantity or value of the
bank note
2 Display of output side selected
3 Display for jam and error messages
4 Display for total amount or quantity of bank
notes
5
Report / MODE
button
6
CLEAR / ON/OFF
button
7 Front insert/output
NC 325
8
9
10
11
12
13
8 Indicates total quantity or value of the bank
note
9 Indicates output side selected
10 Indicates total amount or quantity of bank
notes
11
Report / MODE
button
12
CLEAR / ON/OFF
button
13 Front insert/output
Содержание NC 315
Страница 39: ......