28
27 Press
the
Start/Stop
button to start the folding process and press the
same button again to end the process.
Note:
The process is automatically terminated 15 seconds after the
last sheet has been folded.
B
Folding the Preset Number
28 Press
the
Preset
button. The first digit in the display starts to flash.
29
Set the first digit in the display by pressing the
Reset/Set
button.
30 Press
the
Preset
button again when the required digit is set at the first
position in the display. The second digit in the display then starts to
flash.
31
Repeat the above procedure to set the other two digits in the display.
32
When all three digits have been set, press the
Start/Stop
button to
start the folding programme.
33
The machine stops automatically when the number of sheets set have
been folded.
B
Clearing Paper Jams
Paper jams may occasionally occur as a result of paper being incorrectly
inserted. Before starting to clear a paper jam, always disconnect the power
plug.
34
Switch off the machine (2) at the power switch (13) and disconnect it
from the power supply.
35
Insert the handwheel (11) in the hole (12) provided on the left-hand
side of the machine (2).
Note:
The handwheel (11) is located under the machine (2).
36
Turn the handwheel (11) in both directions to clear the paper jam.
37
If this procedure proves unsuccessful, remove the front folding plate
(8.1) and the rear folding plate (8.2) and open the cover (3) of the
paper feed (4).
38
Repeat Step 3 in order to clear the paper jam.
