Setting Up
4
Inserting the microSD memory card
The phone memory can be extended by installing the microSD memory card option. This increases
the quantity of data which can be stored.
1. Open the silver metal clip above the SIM card slots by sliding it gently
downwards until it unlocks with a soft click. Pivot the metal bar up.
2. Lay the microSD memory card with the contacts facing down in the open
compartment. The shape of the compartment corresponds exactly to the
shape of the microSD memory card, meaning that it cannot be inserted
incorrectly.
3. Pivot the metal bar down and prize it gently to the upward, using a little
force, until the metal bar snaps lightly into place.
Charging the battery
Attention: For safety reasons, only use the charging adapter and cable supplied. Other charging ad
apters could damage the phone.
WARNING: Before starting to charge the battery, check that it has been installed properly. Do not
remove the battery while it is being charged. This could damage the phone.
Note:
When charging the battery for the first time, it should be charged for at least 4 hours. Some
batteries only reach their full capacity after several complete charge/discharge cycles. If the
battery is fully discharged, it may take some time for the charging process to be indicated.
WARNING: Only charge the battery when at room temperature. Do not expose the battery to
heat, direct sunlight or temperatures below 0 °C / above 45 °C.
Connect the charging adapter plug and cable as illustrated in the diagram. For safety reasons, only
use the charging adapter and cable supplied.
Ñ
ÑÑ
