Olympia Becco, Руководство по эксплуатации

Страница: 19 / 30

26
27
28
29
30
Bluetooth
19
Phone security
Navigate through the
Phonesecurity
menu using the
B
/
C
keys and press the
F
key to select from
the following menu options:
Note: If the phone lock is enabled, you will need to enter the phone lock password every time you
switch on the phone.
Phonelock
Enable/Disable the phone lock.
Changepassword
Change the phone lock password. Follow the instructions displayed.
Note: The phone lock password is set to 1234 at the factory.
Bluetooth
The Bluetooth function, a standard for wireless data transfer, can be used to exchange data with
other Bluetooth-capable devices free of charge.
Navigate as follows:
D B
/
C
Settings
B
/
C
Bluetooth
B
/
C
Power
Complete further settings in the
Bluetooth
menu for
Visibility
,
Mydevice
,
Devicename:
or
Advancesettings
.
Restoring the factory settings
Note: If you restore the factory (default) settings, all the data saved is lost! You must use the phone
lock password (
+
Page 19) to restore the default factory settings.
Proceed as follows to restore the factory settings:
1. When in Standby mode, press:
D B
/
C Settings Restorefactorysettings
2. Enter the phone lock password and press
F
to confirm the entry.
3. Press
F
again to answer the next prompt.
The phone restarts and the factory settings are restored.
SOS (Emergency Call) Function
The SOS key activates the emergency call function. Press and hold the SOS key for approx. 3 sec. to
trigger an emergency call. An acoustic alarm signal is sounded and the emergency text is sent to the
phone numbers stored for the purpose. After that, the respective phone numbers stored are dialled in
succession in Handsfree mode. You can assign up to 5 phone numbers to the SOS key.
To assign SOS numbers to the SOS key, open the
EmergencySettings
menu and proceed as follows:
B
/
C
Numberlist
Open the option with which to assign phone numbers to the
emergency call function manually.
Female / Male contacts
Use these menu options to store a respective number you can later call by pressing and holding the
key (female contact) or key (male contact) in Standby mode.
To assign phone numbers to the keys, select
Settings
/
EmergencySettings
/
FemaleNumber
/
MaleNumber
and
proceed as follows:
T
F
Enter the phone number to be stored and confirm it.
Set the phone to Standby mode, press the corresponding key for approx. 2 sec. and the phone
number assigned is dialled.
Note: The phone lock password is set to 1234 at the factory.