Olympia A 240 Combo Скачать руководство пользователя страница 13

Страница: 13 / 75

Important Safety Information

Please observe the following to ensure the device is used safely and
functions reliably:

Read this manual thoroughly and observe the instructions and
information in it when operating the device.

Keep this operating manual in a safe place for future reference.

Before starting to use the device, set it down on a level, stable working
base.

1.1

Safety information, laminator

Prevent damage to the power plug and power cable. Never twist the
power cable. Do not operate the unit if the power cable or power plug is
damaged.

Do not use the device in the vicinity of hot surfaces or in damp
environments and protect it from direct sunlight and dusty conditions.

Disconnect the power plug before starting to clean the unit. Never use
any solvents or aggressive cleaning agents.

Metallic objects cannot be laminated.

Children must not be allowed in the vicinity of the device when it is
ready to operate.

Disconnect the power plug when the device is not in use.

Always switch the unit off immediately if it emits a strong smell or it is
not in operation.

Never touch the power plug with wet hands.

Ensure that the On/Off switch is in the

OFF

position before connecting

the laminator to the mains power supply.

Only insert lamination foil intended for the device, refer to Chapter
“Technical Data”. Using lamination foil which is too large could lead to
the unit jamming.

Do not laminate heat sensitive materials, such as thermal paper, in the
unit.

Lamination of moist documents produces poor results.

Do not use lamination foil intended for cold lamination for hot lamination.
This could damage the device, lamination foil and document.

Never cut lamination foil to size. The resulting cut edges could cause
the lamination foil to jam.

Keep loose clothing, ties, jewellery, long hair and other loose objects
away from the laminator infeed slot. Risk of injury!

The unit may only be used in dry, indoor rooms.

1.2

Safety information, trimmer

Do not take hold of the device near the cutting head when moving it or
packing it away. The blades in the cutting head are sharp. Risk of injury!

Use both hands to operate the device.

Keep loose clothing, ties, jewellery, long hair and other loose objects
away from the trimmer. Risk of injury!

The device is only intended for cutting paper, card, photo paper and
lamination foil.

Before cutting, remove any staples or paper clips from the document.

The blades must be neither greased nor ground.

Do not use the device if the cutting head or cutting head housing is
damaged.

The device must not be used if the knife protection is not installed
properly.

Be careful not to cut your fingers when replacing cutting head. Avoid
contact with the knife blades at all times.

Keep the device out of the reach of children.

Children and minors may only use the device under the supervision of
an adult.

The device is not intended to cut fingernails.

Содержание A 240 Combo












































































Результаты поиска

Содержание A 240 Combo

Отзывы:

Похожие инструкции для A 240 Combo

Бренды по названию

Популярные бренды

Olympia A 240 Combo, Руководство по эксплуатации

Результаты поиска

Содержание A 240 Combo

Отзывы:

Похожие инструкции для A 240 Combo

Бренды по названию

Популярные бренды