Olympia A 235, Руководство пользователя

Страница: 20 / 66

20
Cleaning and Servicing
Deposits and residual adhesive on the transport rollers can influence the re-
sults of the laminating process. Therefore, the transport rollers must be
cleaned periodically after use:
To do this, insert a folded piece of paper in the insertion slot. Residual adhe-
sive is removed and taken up by the paper when ejected. Repeat the process
several times.
Disconnect the power plug before starting to clean the unit with a damp cloth.
If necessary, the housing can be cleaned using a cloth moistened with clean
water with a little mild soap applied. Never use any solvents or aggressive
cleaning agents.
Troubleshooting
Fault Corrective measures
•
Red LED (POWER) does not light
up
•
Unit does not respond
•
Check that the power plug has been
properly connected to the power
socket.
•
If the fault cannot be cleared, con-
tact our hotline.
•
Foil jam
•
Check the foil pockets being used
are the correct size.
•
Only use pouches of the size speci-
fied.
•
Ensure that the pouch has been in-
serted correctly in the unit.
•
To clear the fault, follow the instruc-
tions in the Section "Clearing Foil
Jams".
•
Laminated foil is not completely
transparent
•
Laminate the same foil again to im-
prove the lamination result.
•
If thicker foil is used (100
μ
m,
125
μ
m), please allow the device to
heat up longer.
Conformity of the equipment to the
EU directives is confirmed by the
CE symbol.