Olympia 4520, Руководство по эксплуатации

Страница: 47 / 52

47
Other Functions Available on the Phone
SETTING THE CODE NUMBER FOR AN OUTSIDE LINE
Model 4520
G
Setting the Code Number for an Outside Line
This setting is only required when your phone is connected within a PABX
system (public access branch exchange). The feature should only be set-up
by competent persons who understand the function
If you use a PABX system, you must enter the number to access an outside line (nor-
mally a “0”). You must also set this number in the phone in order to be able to call back
callers from the call lists or to insert the number for an outside line later
1
Navigate to the
SET 3 LCODE
menu
2
Press the key ------0 appears in the display
3
Press the key to delete the preset code
4
Enter the number to access an outside line A maximum of 16 digits can be entered
5
Press the key to confirm the entry.
Making Calls with the Number for an Outside Line
The number for an outside line must be set-up before being used for the first time (refer
to Section Setting the Code Number for an Outside Line on Page 47 ).
1
Dial the required phone number
You can also use a number in the call lists
2
Press the key twice The number for an outside line is inserted to precede the
actual phone number
3
Lift the receiver
Assigning Internal Phone Numbers
In order to forward calls to other phones, you must assign the phones an internal call
number
1
Press and hold the key The number of a phone to which calls could be trans-
ferred appears in the display. If this setting is performed for the first time, EL-- ap-
pears in the display
2
Press the key and enter the internal phone number using the digit keys (e.g. "1"
and "2").
3
Press the key to confirm the entry.