2. Installation
OPERATING
INSTRUCTIONS
3
Page
Important Information
NOTE:
Refer to Section
Equipment Description
for information
on the location of the equipment elements mentioned
below.
NOTE:
Do not mix old and new batteries.
NOTE:
Do not mix alkaline, standard (zinc
−
carbon) or
rechargeable batteries.
NOTE:
If the telephone will not be used for a longer period,
remove the batteries to prevent damage caused by the
batteries leaking. Pull out the phone plug from
telephone line socket before opening the battery
compartment.
NOTE:
Ensure that the batteries are inserted the right way
round (refer to the direction on the diagram in the
battery compartment). Reversed polarity can cause
damage to the telephone.
1. Open the battery compartment and insert 3 AAA batteries.
2. Insert the plugs in the relevant sockets provided on the desk telephone
(they cannot be incorrectly connected because the sockets and plugs
are designed to prevent reverse poling).
3. Plug the telephone line plug in the corresponding socket in the
telephone connection socket.
NOTE:
The display lighting is only active when batteries are
inserted/fully charged. If the display no longer
functions, change the batteries.
NOTE:
Pull out the phone plug from telephone line socket
before opening the battery compartment.
4. Set the volume control switch for the receiver to the required position.
The switch is located on the side of the receiver.
