Olympia 4210, Руководство по эксплуатации

Страница: 14 / 28

6. Telephoning
OPERATING
INSTRUCTIONS
10 Page
Telephoning
Taking a Call
1. The telephone rings, a call is received.
2. Pick up the receiver or press the
< button to take the call. The call time
indicator starts.
3. Replace the receiver or press the < button again to end the call.
Making a Call
1. Pick up the receiver or press the < button and wait for the dialling tone.
2. Dial the phone number. The call time indicator is started approx. 5
seconds after the first ringing tone.
It is also possible to make a call by dialling the number first and then lifting
the receiver or pressing the < button. When entering the number, it is
possible to correct wrong digits by pressing the S button.
Redialling
1. Pick up the receiver or press the
<
button.
2. Press the O button in order to redial the last number dialled.
The telephone stores up to 16 phone numbers which have been dialled.
Tip: When the memory is full, the oldest entry will subsequently be
automatically overwritten.
1. Press the Î button.
2. Press the
_/`
buttons to select a phone number.
3. Pick up the receiver or press the O button to dial the number.
Delete entries:
1. Press the Î button.
2. Press the _/` buttons to select a phone number.
3. Press the
S
button to delete the entry currently selected.
4. Press the _/` button to select End of list .
5. Press the S button to return to Standby mode.
Putting a Call on Hold
1. Press the Æ/Í button during a call and replace the receiver on − hook in
order to put the call on hold.
2. Pick up the receiver or press the
<
button to resume the call.
Changing the Receiver Volume
On the inner side of the receiver is a sliding switch ( E ) which is used to
set the receiver volume. This switch can be adjusted at any time to the
volume required, even during a call.
Changing the Ringing Volume
Press the Ä button in order to adjust the volume of the ringing tone.
There are 4 levels available for selection.