A-1900
Test card
Manual TEST or Resetting Errors with
the A-1900 Test card (not included
and is available only on request).
In
order to test or reset the device you
must place the card on the side of the
indications and remove it instantly for
TEST or remove it after the reset is
conducted (the indications light in
sequence).
Page
4 from
4
923193903_09_003
WARRANTY
Olympia Electronics guarantees the quality, condition and operation of the goods. The period of
warranty is specified in the official catalogue of Olympia Electronics and also in the technical leaflet,
which accompanies each product. This warranty ceases to exist if the buyer does not follow the
technical instructions included in official documents given by Olympia Electronics or if the buyer
modifies the goods provided or has any repairs or re-setting done by a third party, unless Olympia
Electronics has fully agreed to them in writing.
Products that have been damaged can be returned to
the premises of our company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge
the buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or
not the buyer the transportation cost.
HEAD OFFICE
72
nd
km
.
O
.
N
.
R
.
Thessaloniki-Katerini
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
www.olympia-electronics.gr
[email protected]
LED MODULE CHARACTERISTICS
Olympia Electronics S.A
.
Non reversible connection between main pcb and led module
11.6-13.6 V DC
4W
6W
1509153
/4P
1509153
/6P
GR-1938/
4
P
GR-1939/4P
GR-1938/6P
GR-1939/6P
65 °C max. across the board
Manufacturer
Model Number
Voltage Range
Connections
Nominal Power
Temperature (tc)