BS-470
BS-470
Shielded input stage to protect against
external interference
N
ormal and high-sensitivity
mode
to
prevent
small
pets
activation
Maximum coverage, on the vertical axis, 12m.
Protection from reverse battery installation
Elegant design
Thank you for your trust in our products
Olympia Electronics - European manufacturer
The wireless infrared motion detector
BS-470
incorporates
a
special high efficiency, multi-focal
and wide angle lens
.
Microprocessor controlled
improved circuitry along with a shielded input
stage ensure maximum protection and external
interference avoidance thus avoiding false
triggering of the device.
The housing of the device has the appropriate
infrastructure to be placed either on a flat surface
or at an angle of surfaces when required.
The device must be mounted in such a position in
order to permit the best possible surveillance.
The mounting height should be between 2.2 and
2.5 meters, with an ideal height of 2.4 metres.
In order to avoid unintended false alarms, the
detectors must not be mounted in areas that have
hot air or air drafts in general such as over
radiators. It must not be mounted near devices that
emit radio waves such as WiFi repeaters and also
must not be in the path of direct sunlight.
Room
door
Balcony door
Window
M
ounting
e
xample
in a typical room
BS-4
70
The sensitivity selection can be used to avoid false
triggering in the presence of small pets.
MOUNT
ING
THE
DEVICE
MOUNT
ING
THE
DEVICE
Wireless infrared motion detector
for BS-468/A
burglar
alarm panel
Wireless infrared motion detector
for BS-468/A
burglar
alarm panel
Page 1 of 5
9214
70000
_09_005
