olympia electronics BS-468, Руководство пользователя

Страница: 9 / 47

11-4-2017 9 921468001_09_015
With the selection
«CHANGE DAY OF WEEK» we see:
With the up and down cursor key we select the required day and
by using the (*) key we make the selection.
With the selection
«DATE SETTING» we see:
We enter first the day then the date and last the 2 last digits
of the year.
With the selection
«TIME SETTING» we see:
We enter the hour (in 24 hour format) and then the minutes.
After a while the display shows a confirmation message.
It is important that the above settings are made correctly in
order to have accurate logging of the events where the time
and date are also logged along with the event.
With the selection
«IDLE BACKLIGHT LEVEL» we select the brightness of the display when the
system is idle. By default the selection is set to 40%.
With the selection
«IDLE BACKLIGHT MODE» we can select when the illumination of the display is
active. There are 3 options:
ALWAYS OFF. The display is illuminated by pressing of any key. The brightness level drops
to the idle backlight level after 1 minute.
ONLY WHEN DISARMED. The display is always illuminated when the system is disarmed.
When the system is armed the display illumination turns ON after a key is pressed and the
brightness level drops after 12 minute.
ALWAYS ON (DEFAULT). The illumination of the display is always ON. This selection
reduces the autonomy of the system in case of power failure.
With the
«BUZZER SETTING» we select if the buzzer is sounded during all the events or only during
alarm events. The default setting is
«SOUNDS TO ALL EVENTS».
_ CHANGE DAY OF WEEK _
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
CHANGE DATE
^
02/05/12
CHANGE TIME
^
09:17