olympia electronics BS-468, Руководство пользователя

Страница: 8 / 47

11-4-2017 8 921468001_09_015
We enter the number of the password (i.e. 03) which we want to change and we see:
After entering the 4 new digits the system request us to repeat them. We enter again the 4 digits. If the
codes match then the change is made and the display shows the relative message.
If we want to delete a password, from the CODES menu select
«DELETE PASSWORD». The screen
changes and we enter the number of the password that we want to delete. After that the system
deletes the password.
If we want to change the main password, from the CODES menu select
«CHANGE MAIN
PASSWORD
». By pressing the key (*) we see:
After entering the 4 new digits of the password we are
prompted to repeat the process. We enter again the 4 digits
and if they match we the previous entry then the display
shows the relative message and the change is made. To
enter the user menu we must use the new main password.
Warning!! By default the main password is 1 2 3 4. The user
must change this password immediately after the installation
of the system is finished.
Selecting from the MASTER MENU the option
«SETTINGS» we see:
With the selection
«ARM WITH TECH. CODE» we select if the
system will be armed or disarmed with the password of the
technician. By default this selection is set to NO.
03:CHANGE PASSWORD
- - - -
CHANGE MAIN PASSWORD
- - - -
______SETTINGS_______
ARM WITH TECH. CODE
DAY OF WEEK SETTING
DATE SETTING
TIME SETTING
IDLE BACKLIGHT LEVEL
IDLE BACKLIGHT MODE
BUZZER SETTING