DISABLE
RELAY (1/64) 01
With the numeric keypad and the ‘ENTER’ key select a specific relay
(e.g. Relay 1) on the required BS-117 panel.
The Display shows.
x
1234567890123456
If ‘ENTER’ is pressed again, the selected relay is deactivated.
7.5 Activation
The fifth selection on the technicians menu is
If ‘ENTER’ is pressed we enter the activation submenu of the system. Through this
submenu we can activate the zones and the outputs of the system. The available
selections of the submenu are.
SELECT->ENTER
ENABLE ITEMS *
ENABLE
ALL SYSTEM
If ‘ENTER’ is pressed then all devices that were previously
deactivated are now activated.
ENABLE
ZONES OF PANEL 1
With the numeric keypad and the ‘ENTER’ key select the required
panel. The Display shows.
ENABLE
ZONE 01
With the numeric keypad and the ‘ENTER’ key select the required zone
of the panel. The Display shows.
All activated zones are marked with the ‘ ‘ symbol.
ENABLE
ALARM RELAY 1
With the numeric keypad and the ‘ENTER’ key select the required
ALARM relay. The Display shows.
And the relay is activated.
ALARM RELAY 1
IS ENABLED
ENABLE
FAULT RELAY 1
With the numeric keypad and the ‘ENTER’ key select the required
FAULT relay. The Display shows.
And the relay is activated.
FAULT RELAY 1
IS ENABLED
1234567890123456
1234567890123456
Date
File
Code
Page
09-
E
.doc
1116000.09-
E
18 from 20
7.4 Deactivation
The fourth selection on the technicians menu is
If ‘ENTER’ is pressed then we enter the deactivation submenu of the system. Through
this menu we can deactivate the operation of the zones and the outputs of the system.
The available selections are:
SELECT->ENTER
DISABLE ITEMS *
DISABLE
ALL SYSTEM
If ‘ENTER’ is pressed then all individual devices of the system cease
to operate.
DISABLE
ZONES OF PANEL 1
Using the keypad and pressing ‘ENTER’ we select the desired panel.
The Display shows.
xxxxxxxxxxxxxxxx
1234567890123456
DISABLE
ZONE 01
With the numeric keypad and the ‘ENTER’ key we select the required
zone. The Display shows:
x
1234567890123456
DISABLE
ALARM RELAY 1
With the numeric keypad and the ‘ENTER’ key we select the
required ALARM relay. The Display shows.
And the relay is deactivated.
ALARM RELAY 1
IS DISABLED
DISABLE
FAULT RELAY 1
With the numeric keypad and the ‘ENTER’ key select the required
FAULT relay. The Display shows.
And the relay is deactivated.
FAULT RELAY 1
IS DISABLED
DISABLE
SIREN 1
With the numeric keypad and the ‘ENTER’ key select the required
SIREN output. The Display shows.
And the siren output is deactivated.
SIREN OUTPUT 1
IS DISABLED
DISABLE
RELAYS OF UNIT 1
With the numeric keypad and the ‘ENTER’ key select the required BS-
117 device. The Display shows.
If ‘ENTER’ is pressed again then all the relays belonging to the
selected BS-117 device are deactivated.
xxxxxxxxxxxxxxxx
1234567890123456
Date
File
Code
Page
09-
E
1116000.09-
E
17 from 20
22
December
2004
22
December
2004
