15.
Carefully slide joist notches of ladder section
onto girder. Try to align notches so they fall into place
all at once. With notches of ladder section all sitting
correctly on girder, slide section approximately 7” from
post. Check alignment of opposite end of ladder
section.
17.
With all ladder sections in place,
check once more for equal spacing. When
satisfied with ladder section positioning,
attach to girders with
4 - 4” screws
per
ladder. Screw from top edge of joist down
into girder.
Pilot hole again with 1/8” bit first to help with
screwing.
16.
Set all remaining ladder sections in place
on girder spacing each
approximately
5 1/2”
apart.
Notch slips onto girder.
7”
Pilot hole joist
first and secure
with 4” screws/
ladder section.
5 1/2”
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 9
5 1/2”
