99 1/4”
Advice:
Prior to fastening walls and
installing rafters, take time to confirm your
walls are level, square and plumb.
Measure diagonal at top and bottom of
walls corner-to-corner. This should be
approximately 99 1/4”. More importantly,
if measurements are not within 1/4”, your
walls are not square. Adjusting now will
make it easier to install roof section
.
99 1/4”
29.
Position and attach
Front Right Corner Filler Trims
(2 @ 3/4” x 2 1/2” x 36
”
) with
4 - 1 1/2” Finishing Nails
per piece.
Attach
Front Top Corner Filler Trim
(2 @ 3/4” x 2 1/2” x 10”) to both sides as shown
above. Use
2 - 1 1/2 Finishing Nails
per piece. Filler trims won’t be visible because
they serve as nailing strips for the Corner Trims which will be attached later.
3/4” Thick
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 16
