43.
Center
Rafter/Facia Nailing Plates
(2) (3/4” x 3/4” x 51”) onto outside of each plywood
panel flush on edge. Attach with
4 - 1 1/4” screws
evenly spaced. The Rafter/Facia Nailing
Plate provides for a greater nailing surface later when you attach side facia.
41.
Locate second
Small Plywood Roof Panel
. Position on rafters on rear of shed. Attach to
rafters with
9 - 1 1/4” screws
as per
Step 39
.
42.
Locate second
Large Plywood Roof Panel
. Position on rafters on rear of shed. Attach to
rafters with
12 - 1 1/4” screws
as per
Step 38
.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 22
