35.
With Rafter Section correctly aligned, secure rafters to walls using
90° Metal Brackets
. Start with
outside rafters and secure 2 Brackets with 1 1/4” screws. Screw into Wall Extension Framing at the
front, and Wall Panel top framing at the rear. Complete both sides.
90° Metal Brackets
36.
With outside rafters properly secured, completely secure remaining interior rafters using
6 - 2 1/2” Screws. Screw into rafters from inside of Extension Wall framing at front of shed and inside
Rear Wall framing at rear of shed, behind Horizontal Wall Cleats.
Front
Front - Shingle overhang
Inside - Shingles flush
Outside Side
37.
Carefully flip Roof Panels over so plywood sheathing is facing up.
Center Rafter/Facia Nailing Plates
(2) (3/4” x 3/4” x 51”) onto outside of each
panel flush with plywood. Attach with 4 - 1 1/4” screws evenly spaced. The
Rafter/Facia Nailing Plate provides for a greater nailing surface later when you
attach side facia.
Rafter/Facia Nailing Plate.
Outside - Shingle overhang
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 20
