44.
Repeat
Steps 38 - 43
to complete Batten Section on opposite side of roof with remaining
Battens
and
Batten Spacers
.
45.
Locate 4
Metal Roof Panels
and 4
Metal Roof Hangers
. To
temporarily hold the
Metal Roof Panels
in place, hook a
Metal Roof
Hangar
onto the lowest Batten, approximately where the center of
the panels will be. Place first
Metal Roof Panel
on Battens and into
Hangar. Do not fasten panels down until
Step 50
. Place remaining 3
panels and hangers on the same way. Metal Roof Panels will overlap
each other.
Parts (Step 45)
Metal Roof Panels
(39” wide x 61” long)
x 4
Hardware (Step 45)
Y38
- Metal Roof Hangers
x 4 total
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 27