background image

Congratulations on assembling 
your 6x6 Maximizer Storage Shed!

Note;

 Our Sheds are shipped as an unfinished product.  If exposed to the elements, the western red 

cedar lumber will weather to a silvery-gray color. If you prefer to keep the cedar lumber looking  
closer to the original color, we suggest that you treat the wood with a good oil base wood stain.  You 
may also wish to paint your new shed rather than stain it.  In both cases we recommend that you  
consult with a paint and stain dealer in your area for their recommendations.

We hope your experience  
assembling your 6x6 Maximizer 
Storage Shed has been both  
positive and rewarding. 
 
We value your feedback and 
would like to hear back from you 
on how well we are doing in the 
following areas: 
 

1. Customer Service 
2. On Time Shipping 
3. Motor Freight Delivery 
4. Quality of Materials 
5. Assembly Manual 
6. Overall Satisfaction. 

 
Please call, write or email us at: 

Canadian Address 
9393 287th Street 
Maple Ridge, British Columbia 
Canada     V2W 1L1

United States Address 
P.O. Box 96 
Sumas, Washington 
USA    98295

Outdoor Living Today

The materials contained in this Assembly 
Manual may be downloaded or copied 
provided that ALL copies retain the  
copyright and any other proprietary 
notices contained on the materials. No 
material may be modified, edited or 
taken out of context such that its use 
creates a false or misleading statement 
or impression as to the positions,  
statements or actions.

Toll Line: 1.888.658.1658         |      Fax: 1.604.462.5333      |      [email protected]

Page 33

Содержание 6x6 Maximizer Storage Shed


































Отзывы: