Olsen Vet Cart Premium, Руководство пользователя, Страница: 9 / 36

9
5.6.2 Instruments Control Panel.
Buttons and Controls of Instrument Control Panel
1
– Ultrasonic Scaler Intensity Control and Endo Function Switch;
2 – Ultrasonic Scaler Water Control;
3 – X-ray Viewer;
4 – X-ray Viewer On/Off Button;
5 – Electrical Micromotor Speed Adjustment;
6 – Electrical Micromotor Rotation Direction Control.
Some functions indicated on control panel may not be available according to the equipment
configuration (e.g.: endo function switch)
- Pneumatic Handpiece Couplings
As a standard, Olsen uses the Borden terminal system in its
equipment, making the Midwest system available as an option.
The Borden coupling without cooling (1) is used only for the low-
speed handpiece coupling.
The Borden refrigerated terminal (2) enables spray adjustment and
is an optional item as well as the Midwest (3) terminal which is also cooled
and has a propulsion air return system that does not return to the user's
hand. These terminals do not have ledges or jambs, providing greater
comfort to the user, and can be dismantled for cleaning without the use of
specific tools.
The optical fiber handpiece coupling (4) is optionally supplied with
special Midwest coupling with 3.1 V output for handpieces with optical fiber
lighting.
Note: The pneumatic system is set to allow enough pressure for the
activation of only one pneumatic handpiece at a time. If any handpiece is
not properly seated in its holder, the propulsion air may partially activate
this handpiece, impairing the equipment’s performance.
Operation instructions:
Connect the handpiece (5) to the coupling by attaching it to the
coupling ring (6), ensuring that it is properly connected and that there is no leakage of air or water.
To activate the rotation: Press the progressive foot pedal (section 5.5). The higher the pressure applied to
the button, the higher the rotational speed of the handpiece.
To adjust the spray: Turn the adjusting ring (8) until the desired volume of water. To adjust the maximum
flow of water, bring the spray adjustment indicators (7) closer to each other. To decrease the flow of water, rotate
the ring so it distances one indicator from the other. The completely opposite points indicate the minimum water
regulation for the spray.
Note: The spray adjustment is not available for the Borden coupling without cooling.