20
7
- Accessory Operation
–
ChronoLub Control Panel (Optional)
1 -
Decreases
2 -
Increases
3 -
Adjust/Enter
4 -
Reset/Esc
7.1.1
- ChronoLub System (Optional)
When removing the handpiece from the holder or extending the rod (Cross
Flex), the multifunction display will identify whether the coupling is for low or high
rotation, show the number of its position on the working table (1 to 5),
and a segmented circle that represents the time of use of the handpiece. When
the last segment starts blinking, the handpiece can be used for another 2 minutes.
When you run out of time, the screen will show a spray can and will emit 3
beeps. From this moment whenever the handpiece is removed from the holder, the
system will beep, repeating the warning every 2 minutes while the handpiece is in
use or out of the holder.
After lubricating the handpiece, with it out of the holder or extending the rod
(Cross Flex), press the Reset/Esc key (4) for 3 seconds to restart the timing. This
procedure can be done at any time.
7.1.2
- Clock - Date and Time (Optional)
To access the Clock function: press the Adjust/Enter key (3) for 3
seconds to access the "AJUSTE" screen. Use the adjustment keys (1 and 2) to
select the “1. RELÓGIO” option.
To adjust the clock: press the Adjust/Enter key (3) to access the "AJUSTAR
RELÓGIO" screen. Use the adjustment keys (1 and 2) to change the selected
value.
To toggle the selection between hour, minute, day, month and year: use
the Adjust/Enter key (3).
To save the changes: press the Adjust/Enter key (3) for 3 seconds.
To cancel and return to the previous screen: press the Reset/Esc key (4).
The options in the "AJUSTE" screen may change if the cardiac monitor
(optional) is available on the device. (section 6.11.4).
7.1.3
- Birthday (Optional)
To access the Anniversary function: press the Adjust/Enter key (3) for 3
seconds to access the "AJUSTE" screen. Use the adjustment keys (1 and 2) to
select the “2. ANIVERSÁRIO” option.
To change the anniversary date: press the Adjust/Enter key (3) to access
the "AJUSTE ANIVERSÁRIO" screen. Use the adjustment keys (1 and 2) to change
the selected value.
To change the selection between day, month and year: use the
Adjust/Enter key (3).
To save the changes: press the Adjust/Enter key (3) for 3 seconds.
To cancel and return to the previous screen: press the Reset/Esc key (4).
The options in the "AJUSTE" screen may change if the cardiac monitor
(optional) is available on the device. (section 6.11.4).
Содержание Infinity
