Olsberg Virgo, Руководство по установке

Страница: 8 / 20

PAGE 8
2.0 INSTALLATION
2.2 - Installation Notes & Guide
Attention should be paid tot he following during and before the installation:
In the first step, the location and the way of connection of the purchased appliance has to be chosen with
consideration of the safety instructions.
The chimney must be suitable for operating your stove.
Installation and usage of stoves must be reported to a competent chimney sweep or another competent
expert. Applying the local regulations a chimney sweep/expert has to issue a written authorization to use
the stove. Ensure to get a receipt of this to certify.
Examination of the chimney happens according to the local rules which are usually national or European
standards.
The local rules should be taken into consideration during the installation of the connecting pipe as well.
These are usually national or European standards. Necessary air supply for sufficient burning has to be
ensured.
2.1 - Heating Capacity - Installation Guide
Only place the quantity of fuel required to achieve the heating requirement.
For max. heat output allowed:
• Open the combustion chamber door slowly for adding new fuel, as otherwise the combustion gases can
escape.
• Empty the ash pan or combustion chamber in good time. Otherwise it is possible for the combustion air
intake to be blocked or for the grate to be damaged.
• Only remove the ash pan to empty it.
• Clean the ash pan compartment regularly after re- moving the ash pan to remove any ash that may have
been spilled (e.g. use a vacuum cleaner).
NOTE:
Any stove and ash residues must have been left to cool before being removed.
This appliance must be installed by a competent person and the installation must comply with bs8303 –
code of practice for installation of domestic heating and cooking appliances burning solid mineral fuel,
national building regulations, local by-laws and standards and the requirements of the health and safety at
work act - in particular:
Handling:
Adequate facilities must be available for loading, unloading and site handling.
Fire cement:
Some types are caustic and should not be allowed to come into contact with the skin. In case of contact
wash immediately with plenty of water.
Asbestos:
These stoves contain no asbestos. If there is a possibility of disturbing any asbestos in the course of
installation then please seek the guidance of a specialist and use appropriate protective equipment.
Metal parts:
When installing or servicing this stove care should be taken to avoid the possibility of personal injury