19
Heating during the transition period
Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much
depends on the external temperature. Therefore, if the
external temperatures are high (above 16°C) the deliv-
ery pressure can be disrupted.
What to do?
●
Open the combustion air slide valve complete.
●
Only put on a small quantity of fuel.
●
Frequently stoke the ash.
Cladding
●
The cladding may not be overheated, as cracks
could appear.
●
Use a maximum of 3 kg wood or briquette for heating.
●
As the natural cladding comes from a „grown“ boul-
der, structure and colour scheme may be very
different.
●
The surface may be altered under temperature
influence.
Special information
The manufacturer’s guarantee expires if the stove is
significantly or permanently overloaded above the
nominal heating output, or if fuels other than those list-
ed are used.
●
The stove must only be used with the combustion
chamber door shut.
● Never remove hot ashes. Only store ashes in a fire
-
proof, non-combustible container.
●
Attention:
The surfaces get hot! Always use the en
-
closed glove when operating the stove.
●
Convection air openings may not be covered.
● Never use white spirit, benzene or other inflamma
-
ble, hazardous materials to ignite the fire.
● The combustion air supply fittings must never be al
-
tered. In particular, it must be ensured that any nec-
essary combustion air pies are open while the fire
-
place is being used.
● Do not make any changes or modifications to the
stove.
Cleaning
What?
How often?
Using what?
inside of stove
at least 1 x per year
hand brush,
vacuum cleaner
connection piece
at least 1 x per year
hand brush,
vacuum cleaner
glass panel
as required
when cold
using glass cleaner for
stoves- and oven glasses
painted surfaces
as required
when cold
with a slightly damp microfibre cloth
