Olmar GENESIS, Инструкция по установке и использованию

Страница: 9 / 14

4. REMOTE CONTROL USE AND FUNCTIONS
4.1 The far infrared fireplace panel is controlled by a remote control that activates it and regulates the functions of
both heating and sanitizing the environment. HEATING FUNCTIONS: To activate the fireplace panel, press the ON
/ OFF button The panel will activate immediately by lighting the image of the fireplace flame.
The power of the panel is at maximum and it sends biogenic waves into the room which, at the speed of light, they
increase the temperature of the solid bodies present without heating the air until their room temperature is
reached (see heating paragraph).
4.2 The chimney panel will work at maximum power for about 90 minutes until it is saturated room and reach the
optimum temperature. After this time, the panel will shrink automatically absorbed power by 50% ensuring the
maintenance of comfort thermal with the minimum of energy required. If the perceived temperature is not
sufficient, pressing the + button on the remote control will restore the panel power to maximum and a immediate
temperature rise.
4.3 PANEL ACTIVITY SIGNAL:
Pressing the ON key activates the flame function with heating In the upper left part
the panel will show a red beam of light projected on the ceiling.
PANEL POSITION AT MAX:
The red light will always remain on and the flame at max.
PANEL POSITION AT MIN:
The red light flashes and the flame goes down.
It is therefore possible to check the heating activity of the fireplace at any time.
4.4 ELECTRONIC THERMOMETER: It is possible to check the ambient temperature of the room via the remote control
display. This function allows you to check the temperature of the air in the room and that perceived.
4.5 FLAME ONLY FUNCTION:
Pressing the - key on the remote control twice turns off the heating operation. Only the
flame remains alight. The red light beam disappears. Emotional function.
4.6 TOTAL SWITCHING OFF THE FIREPLACE : press the - key on the remote control twice and then press the OFF key.
The heating operation stops and the flame turns off.
TO OBTAIN THE MAXIMUM HEATING RESULT OF THE ROOM, WE RECOMMEND DO NOT TURN OFF THE PRODUCT BUT MAKE
IT WORK AUTOMATICALLY. THE PRODUCT IT HAS BEEN DESIGNED TO GUARANTEE OPTIMAL ENERGY EFFICIENCY WITH THE
MINIMUM CONSUMPTION OF ELECTRICITY.
9