Olivetti PR4 SLIP, Руководство по обслуживанию

Страница: 23 / 56

4-2 XYAA6338
4.1 OPERATOR TEST
If the printer's front cover is closed while the printer is
in the Operator Test LED configuration (refer to the
table on the previous page) and one of the two console
keys is pressed, the printer's firmware release, defined
setup parameters and character set configured will be
printed on a sheet of paper.
4.2 SETUP FROM THE CONSOLE
4.2.1 Accessing this Setup Mode
The procedure to follow for accessing this Setup is
explained in the section
Setup and Adjustments and
informs how to obtain the LED configuration for setup.
If the printer's front cover is closed (with the Setup
LED configuration) and one of the two console keys is
pressed, the defined setup parameters, the functions
of the keys in this mode and the titles of the main
menus will be printed as shown in the example below:
FW REL. 2.00B VER. 002
MICR REL. 2.00 VER. 029
EMULATION: EPSON TM-U590
BIT: 8
BAUD: 9600
STOP: 1
PARITY: NONE
HANDSHAKE: XON/XOFF
NATION: CP 437
CPI: 16.6
CHEQUE PRINT: REAR
AUTO LF: NO
RECEIVE BUFFER: 2048
BUSY OFFLINE: YES
HW RES PIN6: NO
HW RES PIN25: NO
TOP LOW: 1
FEEDER: FRONT
CONSOLE KEY FUNCTIONS:
LEFT KEY1 NEXT ITEM
RIGHT KEY2 SELECTS THE ITEM
I/O USER
USER: NATION CPI OPTION
OPTION: CHEQUE PRINT DISPLAY
AUTO LF RECEIVE BUFFER BUSY
HW RES PIN 6 HW RES PIN25 TOP LOW
FEEDER EXIT
USER: EXIT
SAVE I/O USER SAVE
SAVE: PRINT SAVE
Defined setup parmeters
Functions of the keys
Main menus