Olivetti PR4 SLIP, Руководство по обслуживанию

Страница: 19 / 56

3-2 XYAA6338
Ref. Ref.
Ref. Ref. Ref.
LED Indications on the Console LED Indications on the Console
LED Indications on the Console LED Indications on the Console LED Indications on the Console
Failure Signaled Failure Signaled
Failure Signaled Failure Signaled Failure Signaled
Corrective Action Corrective Action
Corrective Action Corrective Action Corrective Action
3.2 CONSOLE INDICATIONS
Different failures (errors or malfunctions) are signaled
on the console in the following ways:
• Error LED (LED 2) flashing
• Error LED (LED 2) fl other LEDs on
• Error LED (LED 2) on.
The following table summarizes all the possible LED
indications:
7 77 77 Follow the table shown on the following page
Incorrect read from EPROM of the MICR
reader adjustment value Readjust the MICR
5 55 55 Incorrect read from EPROM of the carriage
position adjustment value Readjust the position of the carriage
Incorrect read from EPROM of the photosensor
adjustment parameters Readjust the photosensors
Press any key to load the default values
and readjust 3 33 33 Incorrect read from EPROM of the initial
SETUP values
2 22 22 Printer covers open Close the covers
1 11
11
a) Paper jam in the Slip path
b) Carriage blocked during reset
c) Faulty cutter
d) Hot print head Remove the paper
Make sure that the carriage slides freely
Make sure that there is paper in the cutter
Wait for the head to cool down