6. Finisher
Field Service Ver. 1.0 Feb. 2007
12
PK-512/513
Adjustment / Setting
6.
Finisher
6.1
FS-FN adjustment
6.1.1
Punch Vertical Position
Functions
• Adjusts the vertical position of the punch holes
Use
• To change the vertical position of the punch holes
Adjustment
Specifica-
tion
• Make a copy in the punch mode and make an adjustment so that 1/2 of the length A is
within the following standard range.
• Specifications: A=80
r
0.5 mm (Interval between the holes unadjustable), 1/2 of the
vertical length A
r
1.0 mm
• Adjustment range: -5.0 mm to +5.0 mm (1 step=0.1 mm)
Adjustment
instructions
• To move the hole position upward: Enter a positive value.
• To move the hole position downward: Enter a negative value.
Setting/
procedure
1.
Call the Service Mode to the screen.
2.
Touch [Finisher].
3.
Touch [FS-FN adjustment].
4.
Touch [Punch Vertical Position].
5.
Touch [ALL].
NOTE
• To make an adjustment separately for each paper size, select the paper size the
adjustment will affect.
6.
Set the correction value using the [+]/[-] keys.
7.
Touch [OK] twice to return.
8.
Touch [Exit] on the Service Mode screen.
9.
Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
10.
Make a copy and check the punch hole positions again.
A04EF3C502DA
A
Service Manual
Y108421-6
