43
SPECIAL FUNCTIONS OF THE ANSWERING
MACHINE ...
You can set the answering machine for the following spe-
cial functions.
•
TOLL SAVER
•
ANNOUNCE ONLY
•
SILENT RECEPTION OF INCOMING MESSAGES
•
ACTIVATE SYNTHESISED MESSAGES
Toll saver ...
With this function, when accessing the answering ma-
chine remotely in order to listen to any messages, the fax
machine will answer as follows:
•
If there are no messages present on the answering
machine, the fase machine will ring twice more than
the preset number before starting communication.
•
If there are messages present on the answering
machine, the fase machine will ring the preset num-
ber of times before starting communication (see
"Changing the number of ring" chapter "For a more
sophisticated use").
Therefore if you hear one ring more than the present num-
ber, you will know immediately that there are no messages
and thus con hang up before the fase starts communication.
This function can only be enabled by technical assistance
personnel and it is not available in all countries.
Procedure
DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
TAD/FAX RX 00
04-03-99 13:00
2
Press the FUNCTION
key until the display
shows --->.
TAD SET-UP
3
Press the START key
and then the
FUNCTION key until
the display shows --->.
TOLL SAVER
4
Press the START key.
ON
5
Press START again to
confirm the setting and
then the STOP key to
bring the fax machine
back to the initial
waiting mode or to
disable the function
press the following keys
in sequence: </>,
START and STOP.
TAD/FAX RX 00
04-03-99 13:00
Announce only...
With this function, every time someone calls, the answer-
ing machine plays OGM #1 but does not record any mes-
sages.
You can use this function whenever you plan to stay
away for a long time, during which it would not be possible
to memorise all messages.
In this case, instead of the usual message, it is best to
record a different one, for instance:
“
From 22 June to 19 September I will only accept faxes.
Please leave no messages.”
Procedure
DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
TAD/FAX RX 00
01-03-99 15:15
2
Press the FUNCTION
key until the display
shows --->.
TAD SET-UP
3
Press the START key
and then the
FUNCTION key until
the display shows --->.
ANNOUNCE ONLY
4
Press the START key.
ANNOUNC. ONLY: OFF
5
Press the </> keys to
show the other option.
ANNOUNC. ONLY: ON
6
Press START to
confirm your selection.
If you have already
recorded OGM #1, the
"PLAYING" message is
displayed and the
answering machine
plays it back. If you
have not recorded it
yet, the “NOT
RECORDED” message
is displayed. Press
START now.
LIFT HANDSET
PRESS
7
Pick up the handset.
TO RECORD
8
Press START and start
recording in the way
you already know.
RECORDING 20
-6-36-45.p65
02/04/01, 9.21
43