Olivetti NETTUN@3000 int'l, Руководство пользователя, Страница: 31 / 133

2-11
SETTING THE DATE AND TIME
To set the date and time, proceed as follows:
1. Select
[F] > GENERAL FUNCTIONS environment, by pressing [ Config] > [Set
setup] keys.
The following screen appears:
F
03.03.2012 18.10 Till No.: 1
Vch: ON Pr.list 1 Operator: Disabled
2. Using the numeric keypad, enter the code
. 1 . . 5 . . 1 . followed by . X .
3. The default format for displaying the date is
DD/MM/YY and corresponds to selection 0.
Select 1 to display the date in the format MM/DD/YY
Select 2 to display the date in the format YY/MM/DD .
4. press . X . to confirm.
5. The default format for displaying the time is
24H , and corresponds to selection 1.
Select 0 to display the time in 12H format .
6. Press . X . to confirm.
7. Enter the date and press . X . to confirm the date entered.
8. The time stored in the cash register is displayed.
9. Enter the time in the format: hh-mm-sec.
10. Press . X . to confirm the time entered.
Note:
•
Changing the date/time is not permitted unless the Z10 report has been run.
Example:
. 1 . . 5 . . 1 . followed by . X .
DD/MM/YY followed by . X .
24H followed by . X .
01-01-2012 followed by . X .
01:19:43 followed by . X .
ENGLISH
FRANÇAIS
DEUTSCH
ESP
AÑOL