Olivetti Fax_Lab 630, Инструкция по эксплуатации

Страница: 22 / 76

20
8. To confirm your choice, press the key:
The display shows:
ZOOM 100%
9. To choose the desired copy size setting, "200%",
"140%", "70%" or "50%", press the keys:
10. To confirm your choice, press the key:
The display shows:
CONTRAST
NORMAL
11. To display the other two types of contrast available,
"CONTRAST - LIGHT" or "CONTRAST - DARK", press
the keys:
12. To confirm your choice, press the key:
The display shows the values that you have just se-
lected. At this point, simply choose the resolution you
want and set the number of copies you want to make:
13. To choose the desired resolution setting, "TEXT" or
"PHOTO", press the key:
14. If you want to make more than one copy (max. 9), enter
the desired number by pressing the keys:
-
15. If you only want to make one copy, skip to the next step.
16. To make the copy, press the key:
The fax machine starts to save the document. Having
done this, the fax machine starts copying.
n o t E
If you want to abort the copy in progress, press the
key. The fax machine will stop copying, unload the document
from the ADF and return to its initial stand-by mode, display-
ing the message "COPY INTERRUPTED". Press the
key to clear the message from the display.
n o t E
To make enlarged or reduced copies of the document, re-
member to place the document against the right-hand side of
the feeder (see the mark printed on the fax machine's casing).
The maximum printing width is 210 mm and the maximum length
is 282 mm. The maximum unprintable margins are: 4 mm on
the left and right sides, 3 mm at the top and 14 mm at the
bottom.