Olivetti Fax_Lab 630, Инструкция по эксплуатации

Страница: 16 / 76

14
1
8. To select the alternative parameter, press the keys:
The display shows:
FAX HEADER
OUTSIDE
9. To confirm the setting, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
S
ETTING UP THE FAX MACHINE
F
EED THE PRINT PAPER INTO THE MACHINE
1. Push the paper support exten-
sion in the slot until it clicks into
position.
2. Holding the sheets by their up-
per edge, insert them by letting
them "drop" into the ASF without
folding or forcing them.
I M P O R T A N T
If you add sheets (max. 40) to the ASF, make sure you place
them
under and not on top of those already present.
The fax machine has a memory that enables it to receive up
to 50 pages ( base model only ) even if you do not add any
paper; for the model with a built-in telephone answer-
ing device only , the capacity may be less than 50 pages
according to the duration of the messages recorded on the
telephone answering device.
I
NSERT THE PRINT CARTRIDGE
I M P O R T A N T
The fax machine comes with a free starter cartridge,
which may however only be used once. If you reinsert
it after the ink out message has been displayed, the
following message will appear: "BEWARE! CARTRIDGE
ALREADY USED! THE CARTRIDGE MAY ONLY BE USED
ONCE". Remember only to use original cartridges (see
code printed at the end of the manual). Non-original or
refilled cartridges are not to be used. The use of such
cartridges makes the product's guarantee null and void.
6. To return the fax machine to its initial stand-by mode,
press the key:
7. If you want to move back one function, press the key:
Position of your name and fax number:
The information at the top of the document to be sent
(name, fax number, date and time and number of pages)
may be received by your correspondent’s fax machine:
- outside the text area immediately below the top edge of
the sheet;
or
- inside the text area, slightly lower down than in the
previous case.
Your fax machine is designed to send this information
inside the text area.
To change the position:
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
FAX SET-UP
3. Press the key:
The display shows:
FAX SET-UP
DATE AND TIME
4. Press the keys:
The display shows:
FAX SET-UP
VARIOUS SETT.
5. Press the key:
The display shows:
VARIOUS SETT.
ECM
6. Press the keys
until the display shows:
VARIOUS SETT.
FAX HEADER
7. Press the key:
The display shows:
FAX HEADER
INSIDE