Olivetti Fax-Lab 105, Инструкция по эксплуатации

Страница: 40 / 60

16
T
O REGULATE THE BUZZER VOLUME
The buzzer indicates particular operating conditions and
faults or errors.
The volume of the buzzer may be set to three levels, "High",
"Medium" and "Low", or may be turned off altogether.
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key:
The display shows:
VARIOUS SETTINGS
4. Press the key
until the display shows:
BUZZER VOL.:LOW
5. To view the other available options, "BUZZER VOL.:HIGH",
"BUZZER VOL.:MED" and "BUZZER VOL.:OFF", press
the keys:
|
/
}
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode, press
the key:
T
O REDUCE THE TRANSMISSION SPEED
The fax machine transmits regularly at a speed of 9600
bps ( b its p er s econd). A transmission speed of 4800 bps
is recommended on disturbed telephone lines.
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key:
The display shows:
VARIOUS SETTINGS
4. Press the key
until the display shows:
TX SPEED 9.6
5. To view the other available value: "TX SPEED 4.8", press
the keys:
|
/
}
4. Press the key
until the display shows:
RETRANS.DOC.:OFF
5. To view the other available option, "RETRANS. DOC.: ON",
press the keys:
|
/
}
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode, press
the key:
T
O HEAR THE LINE SIGNALS
The fax machine is set up so that you can hear the dialling
tones during the dialling phases as well as the connec-
tion signals exchanged between your fax machine and
your correspondent's fax machine. If you cannot hear them,
program the function as follows:
1. Press the key
until the display shows:
INSTALLATION
2. Press the key
until the display shows:
LINE MONITOR:OFF
3. To view the other available option, "LINE MONITOR:ON",
press the keys:
|
/
}
4. To confirm your choice, press the key:
5. To return the fax machine to its initial stand-by mode, press
the key:
T
O REGULATE THE SPEAKER VOLUME
If the volume of the dialling tones and connection signals is
too low or too high , regulate it using the key.
1. Press the key:
The display shows:
ON LINE
2. To raise or lower the volume of the speaker, press the key:
The display shows the volume level set in the top right-
hand corner.