Olivetti Explor@ 100, Руководство по обслуживанию

Страница: 48 / 59

3.6
REMOVAL OF THE HARD DISK
To remove the ’hard disk proceed as follows:
•
Remove the supporting base and the rear cover as described previously.
•
Life and move the rear housing as described previously, taking care not to damage the wiring.
•
Disconnect IDE cable A from the hard disk.
•
Back off the four rear screws B .
•
Remove the hard disk.
A
Figure 3-10
B B
Figure 3-11
For reassembly, reverse the above procedure.
XZAC3274 Service Manual 3-7