Olivetti DF-670, Руководство по обслуживанию

Страница: 23 / 54

3LB
1-3-4
U246
Setting the finisher
Description
Provides various settings for the built-in finisher, if furnished.
Purpose
Adjusts the side registration cursor stop position if paper registration is poor or stapling is made outside the
specified area.
Setting
1. Press the start key.
2. Select the desired cursor position.
3. Change the setting using the +/- or numeric keys.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U342
Setting the ejection restriction
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously when the internal eject tray
is selected as the eject location.
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: ON
Details of restriction (number of sheets to be ejected continuously after the start key is pressed)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting
range Initial
setting Change in
value per step
FRONT Front side registration cursor stop
position -4 to +4 0 0.566 mm
REAR Rear side registration cursor stop
position -4 to +4 0 0.566 mm
END Trailing edge registration cursor stop
position -4 to +4 0 0.566 mm
Display Description
ON Sets restriction on the number of sheets
OFF Cancels restriction on the number of sheets
Condition Number of sheets
When no optional ejection device is installed 250
When the job separator is installed 150
When the built-in finisher is installed 100
Service Manual Y108690-3