10-12
Internet Faxing (i-FAX) > i-FAX transmission procedure
4
Configure the detailed settings.
1
[Mode]
> [
Simple
] or [
Full
]
2
"
Via Server
"
> [
On
] or [
Off
].
When this setting is set to [
Off
], transmission takes place by direct SMTP (not through an
e-mail server).
When this setting is set to [
On
], transmission takes place by the i-FAX method (through an
e-mail server).
5
Specifying the Destinations Conditions.
Select [
Destination Condition
].
The available settings are shown below.
6
Selecting the functions.
Grayed out items cannot be set.
7
Press the [Start] key.
When scanning finishes, transmission starts.
NOTE
The settings are automatically configured based on the i-FAX transmission type that
is set in
Embedded Web Server RX
. When the transmission type is set to [
Specify
for Each Destination
], these settings can be configured.
Item
Description
Resolution
Specify the resolutions that can be received by the destination fax
machine.
If you try to send an i-FAX using a prohibited resolution, it is
automatically changed to a permitted resolution and then sent.
• 200 × 100 dpi: Permitted (fixed)
• 200 × 200 dpi: Permitted (fixed)
• 200 × 400 dpi: Permitted or prohibited
• 400 × 400 dpi: Permitted or prohibited
• 600 × 600 dpi: Permitted or prohibited
To permit a resolution setting, select the check box to add a check
mark.
To prohibit a resolution setting, select the check box to remove the
check mark.
Compression
Select a suitable file format for the destination fax machine.
MH, MR, MMR or JBIG
Paper Size
Display the sending paper size for the destination fax machine. If
you try to send an i-FAX using a prohibited paper size, it is
automatically changed to a permitted paper size and then sent.
• A4/Letter: Permitted (fixed)
Содержание d-Copia 3202MF
Страница 1: ...FAXSystem12 FAX OPERATION GUIDE Code 606309en...
Страница 117: ...5 25 Using Convenient Fax Functions FAX Box Function FAX Reception Box...
Страница 233: ...10 15 Internet Faxing i FAX i FAX Reception...
Страница 269: ......
