Olivetti d-Color MF 4003 страница 26 Скачать руководство пользователя

Страница: 26 / 688

d-Color MF4003/MF3303

A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

A-4

3. SAFETY WARNINGS

3.1 MODIFICATIONS NOT AUTHORIZED BY

OLIVETTI

brand products are renowned for their high reliability. This reliability is

achieved

through high-quality design and a solid service network.
Product design is a highly complicated and delicate process where numerous mechanical,

physical, and electrical aspects have to be taken into consideration, with the aim of arriving at

proper tolerances and safety factors. For this reason, unauthorized modifications involve a high

risk of degradation in performance and safety. Such modifications are therefore strictly

prohibited. the points listed below are not exhaustive, but they illustrate the reasoning behind

this policy.

3.1.1 Actions requiring special attention

WARNING

▪ Do not make any modifications to the product

unless otherwise instructed by

OLI

▪ Do not use any part not specified by

OLI

▪ Do not use any power cord or power plug not

specified by

OLI

▪ Use only the protective fuses specified by

OLI

Use of any type of fuse or related part not

specified by

OLI

makes safety devices

inoperative which may result in a fire from

high heat.

▪ Do not disable fuse functions or use a wire,

metal clip, solder, or other conductor in place
of the fuse.

Fire may result from high heat.

▪ Do not disable relay functions (for example,

inserting a piece of paper between relay
contacts to hamper circuit action.)

Fire may result from high heat.

Service Manual

Y119930-3

Содержание d-Color MF 4003
















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-Color MF 4003

Отзывы:

Похожие инструкции для d-Color MF 4003

Бренды по названию

Популярные бренды

Olivetti d-Color MF 4003, Руководство по обслуживанию

Результаты поиска

Содержание d-Color MF 4003

Отзывы:

Похожие инструкции для d-Color MF 4003

Бренды по названию

Популярные бренды