Olivetti Copia 9915F Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 79

Olivetti Copia 9915F Скачать руководство пользователя страница 79

License Agreements

This equipment is not designed for making emergency telephony calls when the power
fails. Alternative arrangements should be made for access to emergency services.

ASA

.

Required in Appendix ZB of BS 7002 (En 60 950) — United Kingdom

MAINS PLUG WIRING INSTRUCTIONS

The mains lead of this equipment is already fitted with a mains plug which is either a non-
rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or
ASTA approved fuse to BS1362 marked or and of the same rating as the one removed
from the plug must be used.
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug
without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws
if a rewireable plug is fitted and fit an appropriate type observing the wiring code below.
DANGER: The fuse should be removed from the cut-off plug and the plug destroyed
immediately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elaswhere into a 13A socket
outlet as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT: The wires in this mains lead are coloured in accordance with the following
code:

GREEN-AND-YELLOW:

Earth

BLUE:

Neutral

BROWN:

Live

As the colours of the wires in this mains lead may not correspond with coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the
plug which is marked with the letter E, or by the safety earth symbol , or coloured green
or green-and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with
the letter L or coloured red.

SUK License EMC.P65

27/03/00, 15.31

1

«
...
77
78
79

Содержание Copia 9915F
















































































Отзывы:

Нет отзывов