Olivetti Copia 9915F Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 79

Olivetti Copia 9915F Скачать руководство пользователя страница 7

INSTALLATION

1-1

Choosing a Location

All electrical equipment is potentially dangerous if not installed and operated correctly.
Make sure that you meet the following requirements when you set up or move the
unit.

• The unit must be installed on a level surface.

• Use only the rated voltage

from a properly grounded wall
socket.

• Keep the unit away from
areas that are:

- Dusty or smoky
- Damp or humid
- Poorly ventilated
- In view of windows or

extremely bright light

- In direct sunlight
- Subject to other extreme

conditions

• Provide ample room for easy

access to the front, back, and
sides of the unit.

• Leave enough space around

the ventilation outlets for heat
from the fan to dissipate
properly. Blocking these outlets
could cause the unit to
overheat, which can cause
serious damage to the internal
parts.

• Use of extension cords is not

recommended.

This manual describes how to use the fax function of the Copia 9915F series.
Part names and functions shared with the copy function (for example, the misfeed
indicator and add paper indicator), are described in the copier operation manual.
For more information, please read the copier operation manual.

Introduction

1. INSTALLATION

Fan

SUK 01 INSTALLATION.P65

27/03/00, 12.38

1

«
...
5
6
7
8
9
...
»

Содержание Copia 9915F
















































































Отзывы:

Нет отзывов