Olivetti Copia 9020, Инструкция по эксплуатации

Страница: 50 / 163

13
1. Open the front panel and move
the developer unit lever in an
anti-clockwise direction.
2. Pull the developer unit out until
it stops. Open the cover.
3. Shake the new toner cartridge.
ADDING TONER
4. Fit the edge of the cartridge in
the developer unit groove, and
insert the prong on the
cartridge into the hole of the
developer unit.
5. Press down on the cartridge
and remove the adhesive tape.
6. Tap the cartridge until all the
toner has gone in. Do not add
any more toner. Remove the
empty cartridge from the unit.
Close the cover and push the
developer unit back in.
7. Bring the lever back to its
original position. Close the front
panel.
COPY OUTFEED AREA (Left-hand side)
1. Remove the paper from the
copy collector tray.
2. Turn the knobb anticlockwise
and remove the jammed sheet.
3. First close left-hand panel then
the front panel.
chap1.p65 01/02/00, 10.42 13