Olivetti 9017, Руководство пользователя, Страница: 16 / 38

1 1
ENGLISHENGLISHENGLISHENGLISHENGLISH
PAPER AND TONER PAPER AND TONER PAPER AND TONER PAPER AND TONER PAPER AND TONER
PPPPPAPER AND T APER AND T
APER AND T APER AND T
APER AND TONER ONER
ONER ONER
ONER
LLLLLOADING COPY P OADING COPY P OADING COPY P OADING COPY P OADING COPY PAPER APER APER APER APER
Loading paper into the cassette
Press on the cassette at the indi-
cated location. Open a pack of copy paper and
take out a stack of paper; turn the
paper stack over and place it in the
cassette against the right wall. Adjust the sheets so that the cor-
ner tabs rest on top of the paper.
Make sure that the paper does not
exceed the maximum level indicat-
ed. Push the cassette back in until
it locks into position.
Adjusting the cassette to a different paper size
The photocopier has a cassette which can be adjusted directly by the user to hold the following standard paper
sizes: A3, A4, A4R e A5R.
If you want to change the paper size of the cassette, proceed as follows.
Press on the cassette at the indi-
cated location and then let go: the
cassette will open automatically.
Press the length adjustment guide to
the right. Still pressing it, slide the
guide up to the symbol for the desired
size. Press the width adjustment guide
to the left. Still pressing it, slide
the guide up to the symbol for the
desired size. After adjusting the cassette, load
the copy paper as shown in the
above section and turn the paper
size dial on the right of the casset-
te to the paper size loaded in the
cassette.
Slowly push the cassette back in
until it stops.
Max fill indicator
Retaining tabs
Adjustment guide releasing
• Moreover it is possible to set a universal paper size: contact the nearest Technical Service for the
details.