Olivetti 9017, Руководство пользователя, Страница: 12 / 38

7
ENGLISHENGLISHENGLISHENGLISHENGLISH
COPYING COPYING
COPYING COPYING
COPYING
SETTING THE NUMBER OF COPIES SETTING THE NUMBER OF COPIES
SETTING THE NUMBER OF COPIES SETTING THE NUMBER OF COPIES
SETTING THE NUMBER OF COPIES
Before starting to copy, the desired number of copies can be set (1-99) by pressing the NUMERIC
keys (A29). To change the number of copies set previously or to correct a typing error, press the CLEAR
key (A30).
ST ST
ST ST STARTING AND ST
ARTING AND ST
ARTING AND ST ARTING AND ST ARTING AND STOPPING A COPYING JOB
OPPING A COPYING JOB
OPPING A COPYING JOB OPPING A COPYING JOB OPPING A COPYING JOB
Press the START key (A28) to start the copy cycle.
To stop the photocopier before the end of the copy cycle, press the STOP key (A14); to reset the number of copies
to be made to 1, press the CLEAR key (A30).
Once copying is finished, to return the copier to the standard mode, press the RESET key (A13).
AUTO CLEAR AUTO CLEAR
AUTO CLEAR AUTO CLEAR AUTO CLEAR
When the photocopier is switched on, if no key is pressed for 2 minutes, the standard copy settings are restored
automatically.
AUTO POWER-OFF AUTO POWER-OFF AUTO POWER-OFF AUTO POWER-OFF AUTO POWER-OFF
When the photocopier is switched on, if no key is pressed for 30 minutes, the POWER SWITCH (B4) is
automatically turned off.
To switch the machine back on, use the POWER SWITCH (B4) again.
• The Auto Power-off function setting can be changed by your Technical Service.
ADJUSTING COPY EXPOSURE ADJUSTING COPY EXPOSURE
ADJUSTING COPY EXPOSURE ADJUSTING COPY EXPOSURE
ADJUSTING COPY EXPOSURE
There are two ways of adjusting the copy exposure:
1. Automatic Control
This is enabled when the copier is switched on and the LED is lit. When manual exposure control is activated,
to return to automatic mode press the AUTOMATIC EXPOSURE key (A16).
2. Manual Control
Cancel the automatic exposure mode by pressing the AUTOMATIC EXPOSURE key (A16) (LED goes out) and
use the EXPOSURE LEVER (A15).
To make copies darker move the slide to the right (dark half-moon).
To make copies lighter move the slide to the left (light half-moon).
• To adjust the exposure, should the copies not correspond to the original,
☞
«If the copies are too light or too
dark», p. 16.